Before the measurement process begins, the sliding door of the measuring machine can be conveniently and easily closed automatically via the software using a pneumatic system, and reopened once the measurement process is complete.

The »orthoScan« swiveling multisensor optical mount always finds the perfect viewing angle for the tool. This allows the cutting edge geometries of tools with helical flutes, such as taps or hob cutters, to be measured without distortion.
 

With a clamping range of 300 mm for holding tools between centers and for measuring exclusively using the throat gauge principle. The tailstock is removable and equipped with high-precision Hirth teeth as a quick-change interface.
 

For electronic tactile measurement of, for example, the flank undercut on tap drills. Available with probe tips ranging from 0.3 mm to 2 mm in diameter.
 

For periodic on-site inspections of your measuring machine and to verify the accuracy of through-beam and reflected-light measurements, ZOLLER offers appropriate measuring and inspection tools for your machine, such as control pins, diameter gauges, and angle gauges.

Key controls are located on the front of the measuring machine. This ensures that you always have full access to the emergency stop switch, the reset button, the membrane keypad, and the button for starting measurement processes.
 

Key controls are located on the front of the measuring machine. This ensures that you always have full access to the emergency stop switch, the reset button, the membrane keypad, and the button for starting measurement processes.

For manually writing to or reading from the code carrier on the tool holder using a handheld reader.

The UPS system ensures that your computer shuts down properly in the event of a power outage, preventing data loss. Mains voltages of 230 V~ (Europe) or 120 V~ (USA) are available.