With »pomBasic« and »pomBasicMicro«, you can select the right camera for any application; the only difference between the two models is the camera technology.

Thanks to the customizable user interface (layout), operation is very simple, fast, and efficient.

 Both camera models have a digital zoom function.

Yes, there are various measurement functions for wear measurements. These measurements can be taken in the micrometer range, and the reports can be generated in the tool view and as results.

Yes, the digital background function allows all operators to perform visual inspections very quickly.

Yes, using the camera's macro function, the measurement process is recorded once and can be recalled as often as needed for repeat measurements.

Yes, using the DXF function, all tools can be compared with the target and actual contours. The deviations will be listed in the inspection report.

For reflected light, the illumination settings are automatically adjusted before each measurement. In addition, the illumination settings for reflected light and transmitted light can be saved individually under the respective tool ID and recalled later.

Ideally, the diameter range for »pomBasic« starts at 3 mm and increases from there, while for »pomBasicMicro,« the diameter range starts at 0.2 mm and increases from there.

Yes, the travel ranges of the X and Y axes are the same for both device models, so larger diameters can also be measured with »pomBasicMicro«.

A wide variety of tool holders are available for a wide range of tool applications.

ZOLLER is continuously expanding the measurement capabilities of the »pomSoft« software for process-oriented measurement. As part of this effort, custom solutions can be integrated.

Yes, there are various options available under ISO certification for full-service maintenance, standard quality control, and quality control and maintenance.