Measuring sensor for runout compensation on the master blade, from D300 mm
Precision camera swivel for axial and radial measuring in incident light
The All-Encompassing Software for All Areas of Tool Presetting, Inspection and Measuring»pilot 3.0«
|Travel range Z axis||Travel range X axis||Measurable Ø in transmitted light||Measurable Ø in incident light||Max. tool width in Z direction||Max. tool weight||Measuring sensor|
|»sawCheck«||450 mm||200 mm||300-800 mm||+90°= 300-800 mm; 0° and -90°= 200-800 mm||30 mm||50 kg||Axial runout measurement|
Measuring program for the measurement of parameters of different saw blade shapes like diameter, width, runout, concentricity, and more tooth shape specific parameters.
Automatic Tool Analysis
Software function for the automatic measurement and analysis of cutting tool geometries in incident and transmitted light, for the calculation of intersection points, distances, angles, and more.
»apus« Editable Measuring Protocol
Descriptions of documented measuring results can be edited with nominal, actual, tolerance, and other values.
There are ever-increasing requirements in manufacturing in regards to accuracy and efficiency, especially when it comes to the regrinding of precision saws. With the ZOLLER »sawCheck«, you possess a user-independent, fully automatic and touchless solution for measuring sawblades, tooth by tooth.
»sawCheck« is efficient and precise, and includes the ability to record measurement results seamlessly. When inspecting teeth, parameters such as tooth shape, division, concentricity, radial runout of the cutting edge and more can be inspected touchless and quickly in transmitted light. Meanwhile, rake angle, clearance angle, tooth thickness, center offset and wear and tear, which can be measured in incident light, both radially and axially. As an option, the axial runout of the master blade can be determined with a measuring sensor. This information is then taken into account when measuring other parameters. ZOLLER provides the solution for a safe and complete check of precision saws — for both manufacturers and for grinding shops.