For µm-accurate tactile measuring and presetting of fine adjustment tools such as reamers or facing cutters.
The Modular Image Processing Software»pilot 3.0«
|Measuring range Z||Measuring range X||Max. tool Ø with sensor||Min. tool Ø with button||Snap gages Ø||Max. horizontal tool Ø||Min. horizontal tool Ø||Max. vertical tool Ø||Min. vertical tool Ø||Snap gages Ø for vertical position of the button||Measuring path loss in Z direction for vertical position of the sensor|
|Button T1 does not swivel||600 mm / 800 mm / 1000 mm||440 mm / 540 mm* / 720 mm*||250 mm / 340 mm / 340 mm||0 mm||100 mm / 50 mm / 50 mm||—||—||—||—||—||—|
|Button T1 swivels:||600 mm / 800 mm / 1000 mm||440 mm / 540 mm* / 720 mm*||—||—||—||280 mm / 550 mm / 600 mm||0 mm||690 mm||54 mm||100 mm / 50 mm / 50 mm||70 mm|
|Button T2 swivels||600 mm / 800 mm / 1000 mm||440 mm / 540 mm* / 720 mm*||—||—||—||280 mm / 540 mm / 720 mm||0 mm||690 mm||50 mm||100 mm / 50 mm / 50 mm||75 mm|
Axial Runout and Concentricity
Measuring program for the determination of axial runout and concentricity with the aid of a measuring sensor.
Complete Measurement of Reamers
Measuring program for the complete measurement of reamers, incl. measurement of the taper with the aid of a double measuring sensor.
Setting of Reamers
Measuring program for the setting of reamers to a required diameter and for the measurement of the taper with the aid of a measuring sensor and diameter gauge.
The efficient solution for tool identification and data transfer
Fast way to the tool identification and data transfer
Data output with DNC system prepared in a controller compatible manner
Safe, quick and guaranteed error-free data transfer to your CNC machine
»reamCheck« allows the μm-accurate and fully automatic measuring of all variants of tools and also specifically those that cannot be measured with image processing because of their cutting geometry.
In addition, reamers can also be tactile preset and measured, for example.