Quick and safe heat shrinking - 5 seconds heat shrinking, 30 seconds cooling
In combination with »roboSet« fully automatic heat shrinking of tools to the nominal value
Safe user guidance with »sls« heat shrink control system: Graphic display of the individual user steps, the currently required accessories and the current status
The optionally available flue gas suction device transports poisonous gases directly from the heat shrinking process into a filter unit.
The All-Encompassing Software for All Areas of Tool Presetting, Inspection and Measuring
»pilot 3.0«Maximum tool length Z | Measuring range X-axis | Max. shrinkable shaft Ø | Maximum tool Ø D | |
»redomatic 400« | 600 mm | 210 / 310 mm | 32 mm | 420 / 620 mm |
»redomatic 600« | 600 / 800 / 1,000 mm | 270 mm | 32 / 50 mm | 540 mm |
Radius and Center Point
Measuring program »contour« for the determination of radius and radius center of cutting tools, including target-actual comparison and tolerance check.
Shrinking to Target Value
Measuring program for the precise shrinking of cutting tools to length target dimension.
Setting to Target Value
Measuring program for the automatic setting of cutting tools to target dimension.
Shrinking to Length Target Dimension
Measuring program for the precise shrinking of drills to a length target value without »masterPiece« adapter.
»sls« Guidance System
The »sls« shrinking guidance system shows the operator on the screen and on the unit the required accessories, the operation steps and the current status — ergonomically, quickly and safely.
Data output with DNC system prepared in a controller compatible manner
Safe, quick and guaranteed error-free data transfer to your CNC machine
The ZOLLER »redomatic« is a multifaceted machine which perfectly masters the three disciplines of presetting, measuring and heat shrinking tools. This combination presetting, heat shrinking and measuring machine is fitted with 4-axis CNC controls, autofocus, a revolving table for quick changes between tool holder types, an induction coil, tailstock and cooling system.
Thanks to the unique »asza« longitudinal axis system, it is particularly suitable for heat shrinking tools simply, quickly and precisely to at least +/- 10 µm accuracy to the target length. You profit from considerable time savings. With »redomatic« you only need 5 seconds per tool for heat shrinking and 30 seconds for cooling. »redomatic« also protects your tool chuck thanks to its limited energy supply.